Photoshop Tutorial : Soul Eater Fantasy Digital Painting

Photoshop Tutorial : Soul Eater Fantasy Digital Painting

This tutorial gives a detailed explanation on how to create a digital illustration using Photoshop and only a mouse as the input device. Of course, the tutorial also applies to users who own a graphic tablet (I recommend Wacom). The tutorial was featured in the book Digital Fantasy Painting by Ilex Press.

Step 1 – The sketch

Photoshop Tutorial : Soul Eater Fantasy Digital Painting Step 1

For this digital painting, I used Photoshop 6, an optical mouse on a Pentium 300Mhz with 128 MB of memory, displayed at 1024×768 resolution on a 17″ monitor.

This tutorial explains a method and technique especially useful when the only input tool available is a mouse and a keyboard, no graphic tablet.

This drawing was inspired by a vivid vision from a nightmare.

The first and most important step for me is to set the right mood for the illustration. I chose to use an orange background color because flesh tones can be easily rendered from it.

I then sketched the main subject on a separate layer (set on multiply) that I kept above the plain colored background.

At this stage, I used the Paintbrush tool set on normal mode with a 10% – 50% opacity black smooth brush varying in size from 5 to 80 pixels wide.

To avoid slowing down the computer during the sketching process I prefer working in low resolution (72 DPI). This way I can draw enjoying a more natural flow without having to worry about Photoshop catching up on my last stroke.

Also, I did not spend any time on details during this phase: I fully concentrated on roughing out the shapes, volume and composition.


Step 2 – Turning on the light

Photoshop Tutorial : Soul Eater Fantasy Digital Painting Step 2

Sketch finished, I resized the image to a higher resolution (300 DPI). The focus shifted to refining the lighting in the sketch layer.

For this stage I employed an opacity “subtraction” technique. I relied heavily on the eraser tool (10%-30% opacity medium sized hard-edged brush) to lighten up areas that were too dark.

While sketching, I had decided that the main light source would be positioned very high above the subject, almost perpendicular to it.

The perfect place for a light source when you need it to cast strong and dramatic shadows.

I zoomed in to 200% and started working on the demon’s head. Where I felt a highlight was needed I erased pixels to reveal the orange background below.

I imagined the demon skin as being very rough and wrinkly, with many heavy folds layered on each other.

I begun defining its base texture by adding smaller highlights (with a 5 pixel wide hard-edged brush) where I felt skin creases and folds should go.

Once finished with the highlights, I was left with a very light amount of pixels on the figure layer. I planned this, because the next phase in the drawing was mostly based on smudging.

Step 3 – Details

Photoshop Tutorial : Soul Eater Fantasy Digital Painting Step 2

Here is where all the rough edges disappear and the highlights blend in.

The smudge tool is the slowest Photoshop painting tool and I find its performance not to be fast enough, not even on a powerful PC. This is why I made sure to arrive to this step with the least amount of pixels to smudge.

Also, while working on this step I paid careful attention to every brush stroke so to avoid having to go back and fix areas of the drawing later on in the process.

Mostly, I used the smudge tool set to normal mode, 40% opacity and a brush size from 10 to 30 pixels wide. The goal was to blend all the highlights I had put in place before, making sure at the same time to shape all the skin folds and creases in a very organic (and twisted!) way.

After having blended the highlights in, I had to use the paintbrush tool to darken many areas. I applied short strokes of black pixels where needed and then I smudged them and shaped them to add detail to shadows that were lacking in strength. This is a technique I use when I paint in real media (oil colors on board) and I love to apply it to the digital medium.

This step was definitely the slowest part of the whole process (probably 35 hours of work, 2-3 hours a day for a few weeks).

Step 4 – Textures

Photoshop Tutorial : Soul Eater Fantasy Digital Painting Step 4

Once I finished adding details and finer shadows, I decided that in order to add more realism to the main figure, I had to apply textures to it.

I started by flattening the main figure and the background layers into a single one. To create the texture, I scanned the skin on the palm of my hand at 600 DPI and saved it in Photoshop format (PSD).

I opened the new file in Photoshop and I created a seamless pattern (using the clone stamp tool to blend areas closer to the edges). I tested out the pattern to see if it would tile without a seam and when I was happy with the results I saved it as a PSD file.

Next, I went back on editing the demon illustration. I used the mask tool to create a selection that would encompass the main figure and then I saved the selection as an alpha channel (for later use).

To apply the newly created texture I used the Texturizing filter. I set its size at 150% with relief set on 10. After the filter was applied, I used the recent Photoshop feature that allows to “fade” out the last effect that was applied. I set the fade out value at 60% to reduce the strength of the texture on the main figure.

Now the skin had achieved a realistic gritty look that reminded me of elephant skin. The image was ready for the next step.

Step 5 – Final highlights

Photoshop Tutorial : Soul Eater Fantasy Digital Painting Step 5

The dodge tool is my favorite tool when it comes to creating highlights on flesh. It is very helpful when used correctly.

I set the dodge tool to highlights and starting from a red-orange base, I easily brought up lighter oranges and yellow tones. I proceeded to apply the effect on all the areas that required highlights using a small brush and an exposure mostly set on 25%.

For lighting up larger areas I used the paintbrush tool set on “overlay” with a light color (yellow and white) and opacity of 10%. The overlay blending mode works really well when you need to add light to an area while at the same time avoiding drastically changing its hue (color), like the dodge tool often does.

During this step, once again, I add to darken many areas and also I colorized a few details of the subject such as the horns and teeth to give them a more yellow appearance.

I had fun adding many smaller additional details: a vast number of veins and skin folds, teeth, saliva and eyes on the heads embedded on the demon’s shoulder.

Step 6- Background and fine-tuning

Photoshop Tutorial : Soul Eater Fantasy Digital Painting Step 6

The main subject was ready. All I needed now was a background and some minor foreground elements, such as the pool of liquid the demon is partially immersed in and the long stick/scepter in its tentacle’s grasp.

For the background I used 3D Studio Max to render a cave wall. The process would require a tutorial all on itself, but for simplicity I will explain the major step involved in it: I used a few rock textures I had created before. I blended them together into a seamless pattern and saved the image. I then imported it in 3D Studio and I assigned the pattern as a bump and diffuse material to an object that was illuminated by a single red light source.

The scepter in the demon’s tentacle was created in 3 steps. First I put the scepter on a separate layer (below the demon’s layer). Then a texture was applied to it using the texturizer. Finally I used the dodge tool to bring highlights up. I also drew a chain and a hanging skull on top of the scepter (this alone, took me 8 hours).

At this point, in order to blend everything together I had to have the demon on a separate layer. I went back to the demon’s layer and erased everything around its edges so to have only the demon remain. Now I loaded the rendered background image in a new layer and I moved it below the demon’s layer. I cleaned up a few stray pixels from the layers above the background and then I flattened the image.

What I was aiming for now was to join all the elements into a harmonious whole. I adjusted the image levels and colorized it until I obtained a more uniform feel and tone.


Comments (14)

I’am very amazed by your technique – I was alittel bit dissapointed that you have not answered my last question two posts ago, but I come closer the answer myself I think stuyding your tutorials.

P.S. I’ve also “done” graphics on on Delluxe Paint III on Amiga a long time ago, when I was a young boy then 🙂

Hello Chris!

I am really sorry I haven’t answered your comment yet but I have been extremely busy with a crazy deadline (as always…).

I value every comment on my site, in fact, I kept you in mind this past week and meant to give you a personalized and detailed answer.

I usually work at 300DPI resolution. The standard, at least in the comics and magazine/book publishing industry.

Do you scan your drawings on paper at a resolution higher than 300 DPI? Maybe that could be the problem?

From my experience, 300 DPI is enough for most digital/print work.

If I understood your question correctly, you work on files sized at 30x40cm which at 300 DPI should equal to 4724 x 5906 pixels. It’s large, but not that large to require brushes of 300 pixel width to outline elements in the page. In fact, a 300 pixel wide brush stroke would appear fairly large on an image of that size. If you were using a resolution higher than 300 DPI, let’s say 600.. then it could be a problem, but I never had to scale to that resolution so far.

I hope this helps. If not, can you give me more details on the size of your images, in pixels?



p.s. Yes… Deluxe Paint III.. the myth! I was 14 when I started using it in 1988.. ahhh… this brings me back to the stone age of comnputer graphics 🙂

Thanks 🙂 You’ve helped me a lot – I’ll try to go on with the instructions and try to do it your way.
And yes, I’ve started with different sizes of scans, mostly with 300dpi but also experimented with higher resolutions.

I’ll let you know if your hint was right hehe

P.S. I’ve done simple animations with DP III and later IV – very raw animations, beeing nearle the same age as you’ve been xD
Splitted it into many parts on mayn 1,44 disks, working with 1024kB ram and system crashes on the fly^^
Finished at least a simple kiddy animation of nearly 10 minutes g

Awesome tutorial, and fantastic image!
Very grotesque 😉

Lea, thank you for the comment. Yes, grotesque is a very good word to describe this piece. I visited your deviantart page and loved those photos of tarantulas!

This image is fantastic, you are an inspiration. I myself am just getting into photoshop. I have hundreds of sketches of beasts, and heros and creatures, I have scanned only a few onto the computer because I am a total novice at photoshop, I have about 10 hours of experience on it. I have produced, to the best of my knowledge and efforts my first painting based on a sketch I did, I would be happy to send it to you and read your comments about it.

It is literally a “click and see what that does” image, but I think it looks ok…I hope to hear back from you about this.


Thank you so much for your kind words. I would love to review your work. Please, register in my forum and post this question under the Photoshop Tips thread and we can take it from there 🙂


Hello! Good Site! Thank you!

I love it.

This will be really helpful for me.
I have a pentium 400MHz,192RAM and mouse with PS7,so this tutorial is fits 🙂

Your tutorial are extremely helpful. I have just discovered your website and I am thrilled. Thanks For taking the time and effort showing this to us. Are there any of your tutorials or youtube or some kind of video format? Thanks again

This is a great site. You are very talented. I am an illustrator and I ran across this tutorial and was trying it out. Is their a way to send you something I have been working on to get some constructive criticism and suggestions? Thank you.

Hello! Iv’e always been wondering how you perfect anatomy while working. In my case, I always zoom in to add details, but in the end, the anatomy is all wrong. That is because I find it hard to work zoomed out. any tips?

[…] de uma mesa digitalizadora. Claro, quem tiver uma também estará apto a seguir o tutorial! Fonte: The Art of Roberto Campos – Soul Eater Fantasy Digital Painting Nível de Dificuldade: Médio/Avançado Visite o blog do autor: Roberto Campos (em […]

Leave a comment